The display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don't have the time or proper measurements, a razor-sharp, low latency display will help you hit your marks.

Item Weight (oz)

144

Package Weight (oz)

192

Height (in)

9

Width (in)

13

Length/Depth (in)

2.88

Compliance

FCC, IC, CE, RoHS

Operating Temperature

32F ­- 100F

Storage Temperature

33F - 115F

Screen Protection

Acrylic or Anti-Reflective Acrylic screen protetor available as an option

Mount Points

2x ¼”-20 on Top, Left & Right sides; RapidRail - Cold Shoe style rails on rear of monitor

Construction

Full Anodized Aluminum Chassis

Display

Panel Type

IPS

Diagonal Size

13

Resolution

1920x1080

Pixel Density

170 PPI

Aspect Ratio

16:9

Active Area

11.59” x 6.52”

Max Brightness

1500 nits

Contrast

1140:1

Gamut

100% Rec.709

Color Depth

10-bit (8+2)

Viewing Angle

178 Deg.

Backlight Type

LED

Adjustable Backlight

Yes

Adaptive Color (YN)

No

Input Signal

3G-SDI Input Types

YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i100

HD-SDI Input Types

YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98

SD-SDI Input Types

480i29.97, 576i25

HDMI Input Types

Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50

Component Input Types

Not Supported

Composite Input Types

Not Supported

Audio Input Types

HDMI & SDI ­ Monitor through Speakers in Front Bezel or through Headphone Jack ­ Metering up to 8 channels

Output Signal

3G-SDI Output Types

YCC 4:2:2 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88,

HD-SDI Output Types

YCC 4:2:2 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits

SD-SDI Output Types

Not Supported

HDMI Output Types

Supports YCC 4:2:2@ 8 bits, RGB & YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50

Component Output Types

Not Supported

Composite Output Types

Not Supported

Audio Output Types

Audio sent downstream unless a LUT is loaded on the output page which disables Audio out.

Connector Type

SDI

2x 3G Inputs, 2x 3G Outputs

HDMI

1x Input, 1x Output

Component

Not Supported

Composite

Not Supported

Audio

1x Headphone Jack on Front of Monitor

Power In

1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max

Power Out

1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max

USB

1x Front USB2, 2x Rear USB2

Controls

Primary

Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle.

Record Capture

Dedicated Image Capture Button on Front Bezel

Data I/O

Storage Media

SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades

USB

1 Front & 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading

Power

Connector

1x XLR 4-pin 12 - 34VDC IN; 12V Lemo 2-pin OUT 4A Max

Voltage

12 - 34VDC

Consumption

25 - 39W

Power Supply

AC - DC Power Converter “Brick” Included with Monitor 110 - 240VAC 50 - 60 HZ INPUT; 15V - 6A OUTPUT

Battery Types

Gold Mount / V­Mount via 4­pin XLR Connector

Output Voltage

12V, 2A max via LEMO Connector

Software

Pixel Zoom

2x & 4x Zoom with smooth pan via joystick

Frame Guides

Yes: Preset Aspect Ratios & Customizable

DSLR Scale

Canon 5DMkii & Canon 7D

Custom Scale

Yes: Underscan & Overscan

Anamorphic De-Squeeze

Yes: 1.33x, 1.5x, 1.66x, 2.0x

Image Rotate

Yes - Automatic or Manual

Image Flip

Yes - Automatic or Manual

Cross Conversion

Yes: HDMI → SDI & SDI → HDMI

Focus Assist

Yes ­ User Adjustable Color and Intensity

Peaking

Yes ­ User Adjustable Intensity

False Color

Yes ­ Rainbow & Arri Style

Zebra

Yes ­ Dual ­ User Configurable

Waveform

Yes ­ Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting

Vectorscope

Yes - with Optional Skintone line

RGB Parade

Yes ­ Fully User Customizable

Histogram

Yes ­ Luma & RGB Style

Image Capture

Yes ­ With Dedicated Button

Custom LUTS

Yes ­ Loadable by Page or as Systemwide Color Calibration

LUT Downstream

Yes ­ Available on SDI 1 or HDMI Out

LUT Import

Via SD Card or USB storage device

Overlay

Yes with Intensity Slider and Blink Setting

Firmware

User Upgradable. Compatible with 1303-1703-2403-3203 Firmware Version 1.1 and later

Audio Meters

Yes ­ HDMI & SDI up to 8 channel

Place call to action here

Recent Work