Wireless - Teradek Bolt 4k 750 LT

The Bolt 4K LT 750 4K TX/RX is a real time wireless video transmission system that supports video signals up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay. Key features include increased range, faster reconnection times, easier setup with Bluetooth App for iOS or Android, and more stable connectivity. These devices are cross-compatible with the entire Bolt 4K Family. This set includes both the Bolt 4K LT TX 750 and  Bolt 4K LT RX 750.

Improved Wireless Performance

Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.

Send Signal up to 6 Receivers

Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.

Bolt 4K 750 RX/TX Kit

  • Bolt 4K 750 Transmitter
  • 2 x Bolt 4K 750 Receivers
  • 3 x Noga Arms
  • 6 x Short BNC Cable
  • 2 x 2 Pin to 2 Pin Lemo Cables
  • 2 x SafeTap D-Tap to 2 Pin to 2 Pin Lemo Cable

Bolt 4K 750 TX

Video Inputs
  • 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
  • 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
Video Outputs

1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω

SDI Ancillary Data Support

Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.

Color Sampling

SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit

Delay Tx To Rx

<0.001sec

Input Cross Conversion

Yes, HDMI to SDI

Supported Resolutions
  • 4Kp23.98/24/25/29.97/30/50/59.94/60
  • 1080p23.98/24/25/29.97/30/50/59.94/60
  • 1080psf23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p50/59.94/60
  • 480p50 576p59.94/60
  • 480i(NTSC)/576i(PAL)
Video Compression

Visually Lossless

Video Format Conversion Support
  • Connect an HD source to the Tx and get a 4K signal out of Rx
  • Connect a 4K source to the Tx, get HD resolution out of Rx
  • You can also mix & match from a single source:
  • 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
  • Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction

None

Audio Format

48kHz 24-bit PCM

Audio Input

Embedded SDI/HDMI Audio Input (2 Channel)

Dimensions

132 x 91 x 27 mm

Weight

358g (12.6 Oz)

Construction

Milled Aluminum(Chassis) and regulation-compliant PCB

Mountability

Multiple mounting options with 1/4"x20 and M3 holes

Configuration Interfaces

OSD with Menu, Joystick Navigation

Switches

On/Off Switch

USB Interface Functionality

Upgrade via Micro-USB

Antennas

4 External 2dBi RP-SMA antennas (included)

Wireless
  • Non-DFS Frequencies:
  • 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
  • DFS Frequencies:
  • 5.270 ~ 5.670 GHz
Channel Bandwidth

13x 40MHz wide channels

RF Channel Selection
  • Auto, Manual
  • Manual available for non-DFS Channels
Encryption

AES-256, RSA-1024 key exchange

Rf Power

19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power)

Range

Up to 750 ft, line of sight

Unicast Multicast

Can connect one Transmitter to up to 6 Receivers

Noise Rejection
  • Can coexist with WiFi and 5GHz cordless phones
  • Can operate up to 6 sets in same location
Power Input

2-Pin Circular locking Connector 6-28 VDC

Battery

None, optional Gold or V mount battery plate

Nominal Power Consumption

20 Watts

Operating Temperature

0-40℃

Bolt 4K 750 RX

Video Outputs
  • 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
  • 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
SDI Ancillary Data Support

Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.

Color Sampling

SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit

Delay Tx To Rx

<0.001sec

Input Cross Conversion

Yes, HDMI to SDI

Supported Resolutions
  • 4Kp23.98/24/25/29.97/30/50/59.94/60
  • 1080p23.98/24/25/29.97/30/50/59.94/60
  • 1080psf23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p50/59.94/60
  • 480p50 576p59.94/60
  • 480i(NTSC)/576i(PAL)
Video Compression

Visually Lossless

Video Format Conversion Support
  • Connect an HD source to the Tx and get a 4K signal out of Rx
  • Connect a 4K source to the Tx, get HD resolution out of Rx
  • You can also mix & match from a single source:
  • 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
  • Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction

17x17x17 3D LUT (supports 10-bit color)

Audio Format

48kHz 24-bit PCM

Audio Output

Embedded SDI/HDMI Audio Output (2 Channel)

Dimensions

112 x 139 x 27 mm

Weight432g (15.2 Oz)
ConstructionMilled Aluminum(Chassis) and regulation-compliant PCB
MountabilityMultiple mounting options with 1/4"x20 and M3 holes
Configuration InterfacesOSD with Menu, Joystick Navigation
SwitchesOn/Off Switch
USB Interface FunctionalityUpgrade via Micro-USB
Antennas5 External 2 dBi antennas (included) or optional Array Panel Antenna
Wireless
  • Non-DFS Frequencies:
  • 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
  • DFS Frequencies:
  • 5.270 ~ 5.670 GHz
Channel Bandwidth13x 40MHz wide channels
RF Channel Selection
  • Auto, Manual
  • Manual available for non-DFS Channels
EncryptionAES-256, RSA-1024 key exchange
RF Power17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
RangeUp to 750 ft, line of sight
Unicast MulticastCan connect one Transmitter to up to 6 Receivers
Noise Rejection
  • Can coexist with WiFi and 5GHz cordless phones
  • Can operate up to 6 sets in same location
Power Input2-Pin Circular locking Connector 6-28 VDC
BatteryNone, optional Gold or V mount battery plate
Nominal Power Consumption18 Watts
Operating Temperature0-40℃

Place call to action here

Recent Work